Fire Detection - Yangın dedektör leri - MINERVA MX Virtual Multi-Function Fire Detectors

TYCO, MINERVA MX Detektörler

The Series 800 are addressable multi-sensor fire, smoke and heat detectors, which can be implemented as several MX VIRTUAL detectors by the MX detection panel. The Series 800 are designed and approved to EN54 and carry land based approvals. The Series 800 of MX VIRTUAL detectors provide the latest fire detection technology in an attractive cost effective package.

	801PC Dedektör The 801PC detector is a combined optical, carbon monoxide and heat detector for use with MX Technology® controllers.
	karbon monoksid + ısı detektörü karbon monoksid + ısı dedektörü + opdik kombine detektör
	800CH Carbon Monoxide + Heat Dedektör The 800CH is a state-of-the-art carbon monoxide and heat detector which allows a full set of detection modes to be implemented in the MX detection panel to suit most fire and heat detection applications.
	karbon monoksid + ısı detektörü dedektörü kombine dedektör
	800H Heat Dedektör The 800H is a flexible cost-effective addressable heat detector with all the features of MX VIRTUAL detectors.
	intelligent adresli ısı detektörü ısı dedektörü
	800I Ionisation Dedektör The 800I offers state-of-the-art ionisation smoke detection with self verification, smoke level indication and threshold compensation for detector condition monitoring.
	intelligent adresli ionizazyon duman detektörü iyanizasyon duman dedektörü
	800P Optical Smoke Dedektör 800P detectors are capable of detecting the visible smoke produced by materials which smoulder or burn slowly, i.e. soft furnishings, plastic foam etc; or "smoke" produced by overheated but unburnt PVC.
	intelligent adresli optik duman detektörü optik duman dedektörü
	800PH Optical Smoke + Heat Dedektör The 800PH is a state-of-the-art smoke and heat detector which allows a full set of detection modes to be implemented in the MX detection panel to suit most smoke and heat detection applications.
	intelligent adresli optik + ısı duman detektörü optik + ısı duman dedektörü
	800 Series Ancillaries Ancillary devices available for use with the 800 Series detector range include remote indication lamps, locking pins, remote LED's, deck-head mounting kits, protective cages and duct probe units.

	600CH Carbon Monoxide + Heat Dedektör 601CH detectors are generally faster than ion-chamber and optical detectors in responding to fires that start by smoldering. They are also more tolerant of positioning and can be mounted in locations where there are likely to be obstacles to free smoke plume movement.
	konvansiyonel karbon monoksid + ısı detektörü konvansiyonel karbon monoksid + ısı dedektörü
	600H Heat Dedektör Heat detectors offer an acceptable, but less sensitive alternative to smoke detectors if environmental conditions rule out their use. 601H-R (rate-of-rise) and 601H-F (fixed temperature) detectors detect abnormally high rates of rise of temperature and abnormally high (static) temperatures respectively.
	konvansiyonel ısı detektörü konvansiyonel ısı dedektörü
	600I Ionisation Dedektör The 601I offers detection of visible and invisible fire aerosols (products of combustion) and are therefore capable of detecting the early presence of hot smoldering and flaming fires, such as wood, paper etc.
	konvansiyonel ionizasyon duman detektörü konvansiyonel iyonizasyon duman dedektörü
	600P Optical Smoke Dedektör 601P detectors are capable of detecting the visible smoke produced by materials which smoulder or burn slowly, i.e. soft furnishings, plastic foam etc; or "smoke" produced by overheated but unburnt PVC.
	konvansiyonel ionizasyon duman detektörü konvansiyonel iyonizasyon duman dedektörü
	600PH Optical Smoke + Heat Dedektör 601PH detectors react to the complete range of fire products, from slow smoldering fires, producing visible particles to open flaming fires producing large numbers of very hot smaller sized aerosols. The combination of optical and heat technology allows detection of clear burning fire products which hitherto could only be easily detected by ion-chamber detectors. konvansiyonel optik+ ısı kombine detektör optik + ısı kombine dedektör

	S200 Plus Triple IR Flame Dedektör The MINERVA S200 Plus flame detectors are Infrared solar blind and multi-channel infra-red flame detectors with low power consumption and high false alarm immunity.
	alev detektörü alev dedektörü
	S131 Flame Dedektör The S131 is a single sensor infra-red flame detector with optical filtering, suitable for use outdoors in a wide range of applications.
	alev detektörü alev dedektörü
	S100 Flame Dedektör The S111 and S121 detectors are single sensor infra-red flame detector with optical filtering for use outdoors in a wide range of applications.
	alev detektörü alev dedektörü
	601F & 601FEx Flame Dedektör The 601F and the 601FEx are full featured solar blind flame detectors for indoor use and boast a high degree of false alarm immunity.
	alev detektörü alev dedektörü
	801F & 801FEx Flame Dedektör The 801FEx point type flame detector forms part of the MXTechnology® range of digital addressable fire detectors.
	alev detektörü alev dedektörü
	Other Flame Dedektör Other flame detectors available from Tyco Safety Products include the Spectrex SharpEye range of UV and UV-IR Flame Detectors.
	alev detektörü alev dedektörü
	Flame Detector Test Equipment There is a wide range of equipment available for testing flame detectors. This range includes test source for use with the Solo range of detector poles, adapters, batteries, chargers and carry cases. alev detektörü alev dedektörü

MINERVA Intrinsically Safe Fire Dedektör

Intrinsically safe fire detection equipment is defined as "equipment and wiring which is incapable of releasing sufficient electrical or thermal energy under normal or abnormal conditions to cause ignition of a specific hazardous atmosphere mixture in its most easily ignited concentration".

This basically means that intrinsically safe equipment and wiring operates using electrical and thermal energy below the level that would be required to spark an explosion in a hazardous area such as an oil refinery.

	801CHEx Carbon Monoxide + Heat Dedektör The 801CHEx is a state-of-the-art intrinsically safe carbon monoxide and heat detector which allows a full set of detection modes to be implemented in the MX detection panel to suit most fire and heat detection applications.
	exproof detektör exproof detektör
	801HEx Heat Dedektör The 801HEx is a flexible cost-effective addressable intrinsically safe heat detector with all the features of MX VIRTUAL detectors.
	exproof detektör exproof detektör
	801PHEx Optical Smoke + Heat Dedektör The 801PHEx is a state-of-the-art intrinsically safe smoke and heat detector which allows a full set of detection modes to be implemented in the MX detection panel to suit most smoke and heat detection applications.
	exproof detektör exproof detektör
	MD601Ex Heat Dedektör The MD601Ex intrinsically safe heat detectors use two networked thermistors in a bridge configuration to provide a fast response that depends both on absolute temperature and rate of rise of temperature.
	exproof detektör exproof detektör
	MDU601Ex Carbon Monoxide + Heat Dedektör The MDU601Ex intrinsically safe detector combines the features of both the MU601Ex detector and the MD601Ex detector to provide a combined CO and Rate-of-Rise Heat detector
	exproof detektör exproof detektör
	MF601Ex Ionisation Dedektör The MF601Ex is an intrinsically safe ionisation detector reacts to the visible and invisible fire aerosols (products of combustion) and are therefore capable of detecting the early presence of hot smouldering and flaming fires such as wood, paper etc.
	exproof detektör exproof detektör
	MR601TEx Optical Smoke + Heat Dedektör The MR601TEx is an intrinsically safe detector that combines optical and heat detector technology to detect slow smouldering fires, open flaming fires and clear burning fire products which hitherto could only be easily detected by ion-chamber detectors.
	exproof detektör exproof detektör
	MU601Ex Carbon Monoxide Dedektör The intrinsically safe MU601Ex is a unique general purpose fire detector which provides very early warning of slow smouldering fires.
	exproof detektör exproof detektör
	801FEx Flame Dedektör The 801FEx point type flame detector forms part of the MXTechnology® range of digital addressable fire detectors. It is a full featured solar blind flame detector for indoor use and boasts a high degree of false alarm immunity.
	exproof detektör exproof detektör
	601FEx Flame Dedektör The 601FEx is a full featured intrinsically safe solar blind flame detectors for indoor use and boast a high degree of false alarm immunity.
	exproof detektör exproof detektör
	Other Intrinsically Safe Detectors This section includes other intrinsically safe detectors available from Tyco Safety Products.

MINERVA Beam Dedektör

FireRay 2000

The FIRE-RAY 2000 is an active infra-red smoke detector. The system comprises of three base elements i.e. a transmitter, receiver and Control Unit. Analysis of the modulated infra-red beam by the Control Unit determines whether smoke is present, and if so generates an alarm signal.

Features:

Range 5 metres up to 100 metres
Area coverage up to 1400m²
Selectable sensitivity
Self-check and automatic compensation
Manual or automatic reset
Optional MINERVA loop powered interface module (LPBD 521)
Suitable for both conventional and addressable fire systems
Fire/fault interface to MINERVA controller
Low current consumption
Flexible system design options
Robust metal construction
Designed to conform to BS5839 Part 5

FireRay 50/100R

The FireRay 50/100R is a reflective infra-red beam smoke detector. The system comprises of two base elements i.e. a combined infra-red transmitter and receiver in a common housing and a reflective prism. The electronics of the combined transmitter and receiver unit analyse the reflected beam from the prism for smoke and generates an alarm condition if a pre-determined level is reached.

Features:

Range 5 to 50 metres (50R)
Range 50 to 100 metres (100R)
Area of coverage up to 750m2 (50R), 1500m² (100R)
Selectable sensitivity
Self-check and automatic compensation
Manual or Automatic Reset
Optional MINERVA loop powered interface module (LPBD521)
Suitable for both Conventional and Addressable Systems
Fire/Fault Interface to the Minerva Controller
Low current consumption
Flexible System Design Options
Robust ABS Construction
Designed to Conform to BS5839 Part 5, EN54 Part 12, UL and Vds

beam detektör beam dedektör. beam detektor beam dedektor


	TEKNİK ELEKTRONİK LTD. Telefon : 0212 293 46 17