MX CONSYS is a powerful Windows compatible programming tool which provides full system programming functions and project configuration and issue control.

MX CONSYS can be used with TYCO, THORN MINERVA MX, T2000,  EXPERT and AUTOCALL MX panels.
 

This highly flexible and extremely powerful programming tool has been used successfully with MX since day one. Specially designed for MX, it is being constantly extended and improved to meet ever changing demands

Features:

• Windows based
• Programs the system across multiple subpanels
• Downloads to the system from one point
• Supports remote dial in capability
• Provides software download as well as configuration download
• Dongle protected
• Provides full project configuration printouts

MINERVA 8/16E/80 Software Tools

Software Tools for the MINERVA 8/16E/80 control panels includes the CONSYS programming software.

The function of the Consys configuration software is to customise a MINERVA 8, 16E or 80 addressable panel system to the requirements of the customer.

Configuration is performed on the basis of data obtained from the customer and includes the following information:

• The number and location of detectors and other ancillaries.
• The addresses of the above devices
• The 'zoning' requirements
• The number and location of any interface boards
• The addresses of the above boards
• Bell mapping options
• Co-Incidence grouping
• System fire options
• Network configuration

MINERVA MXDesigner System Design Tool

MXDesigner is a sophisticated engineering design tool that not only ensures system parameters and design rules are obeyed but is key to the ordering and documentation process.

Battery calculations, loop loading calculations, remote bus parameters, system schematics and parts lists are all included.

The extensive use of graphics and 'drag and drop' techniques makes the system easy and quick to use. In addition, a design module for the intrinsically safe  MXDigital detectors and associated System 800 components is included.

MINERVA MXFlow Commissioning Aid

MXFlow takes MXConsys 'event action' and transcribes it into a graphical format that is comprehensive and easy to follow. It can be a valuable commissioning tool that saves time and effort as well as creating an easily understood form of project documentation for future service use.  

MINERVA MXRemote Communications Software

MX REMOTE is a Windows based software tool for remote service and support and MX detection panels.

MX REMOTE provides a full function fire panel repeater running on a PC either locally or over dial up telephone lines.

Providing the operator has the correct passwords MX REMOTE allows all operator, manager, service and engineer functions available at the panel to be provided at the PC. This allows the customer or the Tyco service organisation to provide remote assistance, service and limited configuration assistance to the installation.

MX REMOTE is available as a stand-alone software application for Tyco service operations.

Alternatively Tyco Safety Products are able to provide consultancy and assistance in implementing MX REMOTE as an integrated part of a central station and service centre system.

MINERVA MX Loop Tester

The MX Loop Tester can be used to test, commission and fault-find a loop of MX analogue addressable detectors and ancillary devices, without having to connect the loop to a fire panel. Up to 250 MX devices may be connected. One Person Installation Mode allows new devices to be installed and field tested to confirm operation. Auto Addressing Mode automatically sets the address of any unprogrammed device that is added.

Walk Test Mode provides a fast alarm response. A laptop (running a terminal program) connected to the unit can be used for operation, display and additional tests and commands.

Features:

• Identifies all detectors / modules on the loop, determining their addresses and device types. Over-addressed (>250), unknown device types, and, generally, duplicate addressed devices are recognised.
• Monitors analogue values to determine device status.
• Provides alarm test for devices (detectors) that support it.
• Allows Walk Test. Any device going into alarm will be shown on the laptop together with its address and time. Walk Test Status (reporting devices / detectors that have not been tested yet) can be requested. Walk test mode overrides detection algorithm delays for fast testing.
• Monitors loop current and loop status, identifying loop open / short and over-current conditions. Details devices present on each side of a broken loop (so that the position of the break or tripped isolator can be determined).
• Commands to operate device LED and control output modules (relays and sounders).
• One Person Installation Mode: Allows addition and field testing of devices without a laptop.
• Auto Addressing Mode: Automatically programs new unaddressed devices with next available address.
• 1,000 event history can be displayed.
• Powered from 110V/230V mains supply via 24V, 3A plug pack, or from 24V batteries if mains supply not available (batteries not included).
• Up to 250 MX devices per loop.
• 2km unscreened cable; loop, lines and spurs supported.
• 1 A drive current for loop devices.
• MX Photo/Heat Detectors– 801PH, 811PH, 812PH, 814PH; 813P and 814P (photo only).
• MX CO/Heat Detectors– 801CH, 811CH, 812CH and 814CH.
• MX CO/Photo/Heat Detectors - 801PC.
• MX Ionisation Detectors– 801I, 812I and 814I.
• MX Heat Detectors– 801H, 811H, 812H and 814H.
• MX Flame Detectors - 801F, 811F.
• VESDA LaserCOMPACT – VLC800MX.
• MX Call Points – CP820, CP830, CP820M, CP830M, DIN820i, DIN830i, RMS800, GAR800,GARA800.
• MX Input Monitor – MIM800, MIM801, CIM800, DIM800, DDM800, BDM800, LAV800.
• MX Output Control – RIM800, SNM800, LPS800, SAM800, SAB800, SAB801.
• MX Input Output Modules - SIO800, DIO800, MIO800, APM800.
• MX Intrinsically Safe (Ex) devices – 801PHEx, 801CHEx, 801HEx, 801FEx, 811FEx, S271i+, S271f+, CP840Ex, IF800Ex.
• MX Potentially Explosive Atmosphere - Type of Protection "n" - 811PHExn, 811CHExn, 811HExn, CP830Exn.
• Detailed diagnostics and commissioning modes via laptop.
• Everything needed for testing (including User Manual, but not laptop) is kept inside a handy multi-pocket carry bag (supplied).
• Flash-based firmware allows field reprogramming / upgrade.
• Order Code (Part Number): FP0898 (Aust/NZ/Fiji), 557.203.021 (UK/Europe).
• Dimensions:
  - Unit : 200mm x 122mm x 46mm; Weight : 2kg
  - Carry bag : 250mm x 250mm x 70mm 

MINERVA MX Password Management System Downloads

MX PMS Software can be downloaded from the secure areas of this site.

he downloads can then be used to upgrade the Password Management System software on site.

Please visit our secure areas to download the files.